Derleme
Yıl 2019,
Cilt: 8 Sayı: 2, 145 - 153, 29.12.2019
Öz
Genel
sağlık için ağız ve diş sağlığı oldukça önemlidir. Ağız ve diş hastalıkları
dünyada en yaygın görülen sağlık problemlerinin başında gelmektedir. Diş eti
hastalıkları; dişi çevreleyen ve dişi destekleyen kemiğe kadar ilerleyen,
dişeti iltihabı ve diş problemlerini kapsamaktadır. Tedavi süresince dental
birçok işlemde biyomalzeme kullanılmaktadır. Tedavinin etkinliğini değiştiren
unsurlar arasında kullanılan malzemeler, malzemelerin kalitesi ve biyo-uyumu
önem arz etmektedir. Vucüt dışarıdan yapısına katılan yabancı maddelere karşı
tepki göstermesine rağmen, dokulara göre geliştirilmiş biyouyumluluk gösteren
biyomalzemeleri kabul etmektedir. Doku ortamı içerisinde herhangi bir hasara
karşı; yüzey konfigürasyonu geliştirme, dokuyu indükleme ve inflamasyona karşı
red cevabı oluşturma, biyomalzemelerin en önemli fiziksel özellikleri
arasındadır. Bu makale de amaç, dental uygulamalarda kullanılan biyomalzemeleri
tanımlamak, sınıflandırmak ve görevlerini araştırmaktır.
Anahtar Kelimeler
biyomalzemeler dental uygulamalar dental uygulamalarda kullanılan biyomalzemeler dental hastalıklar
Kaynakça
- 1. Lorenzo, J., M. Horowitz, and Y. Choi, Osteoimmunology: interactions of the bone and immune system. Endocr Rev, 2008. 29(4): p. 403-40.
- 2. Gostemeyer, G., S.R. Baker, and F. Schwendicke, Barriers and facilitators for provision of oral health care in dependent older people: a systematic review. Clin Oral Investig, 2019
- 3. Deb, S. and S. Chana, Biomaterials in Relation to Dentistry. Front Oral Biol, 2015. 17: p. 1-12.
- 4. Niinomi, M., Recent metallic materials for biomedical applications. Metallurgical and Materials Transactions A, 2002(33): p. 477.
- 5. Edgerton, M. and M.J. Levine, Biocompatibility: its future in prosthodontic research. J Prosthet Dent, 1993. 69(4): p. 406-15.
- 6. Jorge, J.R., et al., Titanium in dentistry: historical development, state of the art and future perspectives. J Indian Prosthodont Soc, 2013. 13(2): p. 71-7.
- 7. Chen, G.Z., D.J. Fray, and T.W. Farthing, Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride. Nature, 2000. 407(6802): p. 361-4.
- 8. Hubalkova, H. and I. Linetskiy, New trends in prosthetic dentistry. Prague Med Rep, 2006. 107(2): p. 149-64.
- 9. Zhang, F., et al., Preparation, microstructures, mechanical properties, and cytocompatibility of TiMn alloys for biomedical applications. J Biomed Mater Res B Appl Biomater, 2010. 94(2): p. 406-13.
- 10. Hrabe, N.W. Characterization of cellular titanium for biomedical applications. 2010. 71-10, 6370;262.
- 11. Juodzbalys, G., Sapragoniene, M., Wennerrberg, A, New Acid Etched Titanium Dental Implant Surface. Stomatologija, Baltic Dental and Maxillofacial Journal, 2003: p. 101-105.
- 12. He, G., et al., Nanostructured Ti-based multi-component alloys with potential for biomedical applications. Biomaterials, 2003. 24(28): p. 5115-20.
- 13. AB, A. ASTM F75 CoCr Alloy. 2007; Available from: http://www.arcam.com/wp-content/uploads/Arcam-ASTM-F75-Cobalt-Chrome.pdf.
- 14. Donald A.NitkinDDS, M., Evaluation of alternative alloys to type III gold for use in fixed prosthodontics. The Journal of the American Dental Association1976. 93(3): p. 622-629.
- 15. Vincent PF, S.L., Basford KE, A comparison of the casting ability of precious and nonprecious alloys for porcelain veneering. The Journal of Prosthetic Dentistry, 1977. 37(5): p. 527-536.
- 16. Nilo A. Sampaio, J.W.J.S., Heloisa A. Acciari, Eduardo N. Codaro Study of Ni-Cr-Mo Alloys for Fixed Dental Prostheses in an Aqueous Solution of 0.05% NAF and in Commercial Mouthwashes. International Journal of Engineering and Innovative Technology (IJEIT), 2013. 2(12).
- 17. H, A., Biyomalzemeler. Bilim ve Teknik, 2002: p. 2-11.
- 18. Shenoy, A. and N. Shenoy, Dental ceramics: An update. J Conserv Dent, 2010. 13(4): p. 195-203.
- 19. Melahat ÇELİK , C.B., Gülsen BAYRAKTAR, Diş Hekimliğinde Zirkonya Uygulamaları. J Dent Fac Atatürk Uni, 2014. 8: p. 106-116.
- 20. Raghavan, R.N., Ceramics in Dentistry, in Sintering of Ceramics- New Emerging TechniquesMarch 2nd 2012.
- 21. Guido Heydecke, M.S., Michael E Razzoog, Evolution and Use of Aluminum Oxide Single-Tooth Implant Abutments: A Short Review and Presentation of Two Cases. The International journal of prosthodontics, 2001. 15(5): p. 488-93.
- 22. Pepla, E., et al., Nano-hydroxyapatite and its applications in preventive, restorative and regenerative dentistry: a review of literature. Ann Stomatol (Roma), 2014. 5(3): p. 108-14.
- 23. Ahmet Pasinli, R.S.A., Yapay Kemik Uygulamaları İçin Hidroksiapatit. Biyo Teknoloji Elektronik Dergisi, 2010. 1(1): p. 41-51.
- 24. Hofmann, K.S.G.B.T.S.F.W.T.K.T., Ullmann's Encyclopedia of Industrial Chemistry2008, Ullmann’s Encyclopedia of Industrial Chemistry.
- 25. Aytuğ, E.Ö., Kemik İçi Dental İmplantlarda Bağ Dokusu ve Kemik Birleşimi. G.Ü. Dişhek. Fak. Der., 1991. 3(2): p. 171-182.
- 26. Depprich, R., et al., Osseointegration of zirconia implants: an SEM observation of the bone-implant interface. Head Face Med, 2008. 4: p. 25.
- 27. Gaviria, L., et al., Current trends in dental implants. J Korean Assoc Oral Maxillofac Surg, 2014. 40(2): p. 50-60.
- 28. Glazer, B., Restoration of endodontically treated teeth with carbon fibre posts--a prospective study. J Can Dent Assoc, 2000. 66(11): p. 613-8.
- 29. Iviglia, G., S. Kargozar, and F. Baino, Biomaterials, Current Strategies, and Novel Nano-Technological Approaches for Periodontal Regeneration. J Funct Biomater, 2019. 10(1).
- 30. Gautam, R., et al., Biocompatibility of polymethylmethacrylate resins used in dentistry. Journal of Biomedical Materials Research Part B-Applied Biomaterials, 2012. 100B(5): p. 1444-1450.
- 31. Park, S.E., M. Chao, and P.A. Raj, Mechanical properties of surface-charged poly(methyl methacrylate) as denture resins. Int J Dent, 2009. 2009: p. 841431.
- 32. Badami, V. and B. Ahuja, Biosmart materials: breaking new ground in dentistry. ScientificWorldJournal, 2014. 2014: p. 986912.
- 33. Polat, N.T., Polimetil Metakrilat (PMMA)'ların Cam Fiberler Güçlendirilmesi. Cumhuriyet Üniversitesi, 2002. 5(1): p. 41-45.
- 34. Arıkan, A., Silikon ve Polieter Lastik Esaslı Ölçü Materyalleri G.Ü. Dişhek. Fak. Der. , 1986. 3(1): p. 213-224.
Yıl 2019,
Cilt: 8 Sayı: 2, 145 - 153, 29.12.2019
Öz
Oral and dental health is very important for overall
health. Oral and dental diseases are among the most common health problems in
the world. Gum diseases involve gingivitis and dental problems, extending to
the surrounding and supporting bone. During treatment, biomaterials are used in
many dental procedures. There are important factors that change the
effectiveness of the treatment like the materials that are used, the quality of
those materials, and their biocompatibility. Although the body reacts against
foreign substances that are implanted into its structure, the body accepts the
biocompatible biomaterials developed for tissues. Against any damage in the
tissue environment, improving surface configuration, inducing tissue, and
create a rejection to inflammation are among the most important physical
properties of biomaterials. The aim of this article is to identify, classify
and investigate the biomaterials used in dental practices.
Anahtar Kelimeler
Kaynakça
- 1. Lorenzo, J., M. Horowitz, and Y. Choi, Osteoimmunology: interactions of the bone and immune system. Endocr Rev, 2008. 29(4): p. 403-40.
- 2. Gostemeyer, G., S.R. Baker, and F. Schwendicke, Barriers and facilitators for provision of oral health care in dependent older people: a systematic review. Clin Oral Investig, 2019
- 3. Deb, S. and S. Chana, Biomaterials in Relation to Dentistry. Front Oral Biol, 2015. 17: p. 1-12.
- 4. Niinomi, M., Recent metallic materials for biomedical applications. Metallurgical and Materials Transactions A, 2002(33): p. 477.
- 5. Edgerton, M. and M.J. Levine, Biocompatibility: its future in prosthodontic research. J Prosthet Dent, 1993. 69(4): p. 406-15.
- 6. Jorge, J.R., et al., Titanium in dentistry: historical development, state of the art and future perspectives. J Indian Prosthodont Soc, 2013. 13(2): p. 71-7.
- 7. Chen, G.Z., D.J. Fray, and T.W. Farthing, Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride. Nature, 2000. 407(6802): p. 361-4.
- 8. Hubalkova, H. and I. Linetskiy, New trends in prosthetic dentistry. Prague Med Rep, 2006. 107(2): p. 149-64.
- 9. Zhang, F., et al., Preparation, microstructures, mechanical properties, and cytocompatibility of TiMn alloys for biomedical applications. J Biomed Mater Res B Appl Biomater, 2010. 94(2): p. 406-13.
- 10. Hrabe, N.W. Characterization of cellular titanium for biomedical applications. 2010. 71-10, 6370;262.
- 11. Juodzbalys, G., Sapragoniene, M., Wennerrberg, A, New Acid Etched Titanium Dental Implant Surface. Stomatologija, Baltic Dental and Maxillofacial Journal, 2003: p. 101-105.
- 12. He, G., et al., Nanostructured Ti-based multi-component alloys with potential for biomedical applications. Biomaterials, 2003. 24(28): p. 5115-20.
- 13. AB, A. ASTM F75 CoCr Alloy. 2007; Available from: http://www.arcam.com/wp-content/uploads/Arcam-ASTM-F75-Cobalt-Chrome.pdf.
- 14. Donald A.NitkinDDS, M., Evaluation of alternative alloys to type III gold for use in fixed prosthodontics. The Journal of the American Dental Association1976. 93(3): p. 622-629.
- 15. Vincent PF, S.L., Basford KE, A comparison of the casting ability of precious and nonprecious alloys for porcelain veneering. The Journal of Prosthetic Dentistry, 1977. 37(5): p. 527-536.
- 16. Nilo A. Sampaio, J.W.J.S., Heloisa A. Acciari, Eduardo N. Codaro Study of Ni-Cr-Mo Alloys for Fixed Dental Prostheses in an Aqueous Solution of 0.05% NAF and in Commercial Mouthwashes. International Journal of Engineering and Innovative Technology (IJEIT), 2013. 2(12).
- 17. H, A., Biyomalzemeler. Bilim ve Teknik, 2002: p. 2-11.
- 18. Shenoy, A. and N. Shenoy, Dental ceramics: An update. J Conserv Dent, 2010. 13(4): p. 195-203.
- 19. Melahat ÇELİK , C.B., Gülsen BAYRAKTAR, Diş Hekimliğinde Zirkonya Uygulamaları. J Dent Fac Atatürk Uni, 2014. 8: p. 106-116.
- 20. Raghavan, R.N., Ceramics in Dentistry, in Sintering of Ceramics- New Emerging TechniquesMarch 2nd 2012.
- 21. Guido Heydecke, M.S., Michael E Razzoog, Evolution and Use of Aluminum Oxide Single-Tooth Implant Abutments: A Short Review and Presentation of Two Cases. The International journal of prosthodontics, 2001. 15(5): p. 488-93.
- 22. Pepla, E., et al., Nano-hydroxyapatite and its applications in preventive, restorative and regenerative dentistry: a review of literature. Ann Stomatol (Roma), 2014. 5(3): p. 108-14.
- 23. Ahmet Pasinli, R.S.A., Yapay Kemik Uygulamaları İçin Hidroksiapatit. Biyo Teknoloji Elektronik Dergisi, 2010. 1(1): p. 41-51.
- 24. Hofmann, K.S.G.B.T.S.F.W.T.K.T., Ullmann's Encyclopedia of Industrial Chemistry2008, Ullmann’s Encyclopedia of Industrial Chemistry.
- 25. Aytuğ, E.Ö., Kemik İçi Dental İmplantlarda Bağ Dokusu ve Kemik Birleşimi. G.Ü. Dişhek. Fak. Der., 1991. 3(2): p. 171-182.
- 26. Depprich, R., et al., Osseointegration of zirconia implants: an SEM observation of the bone-implant interface. Head Face Med, 2008. 4: p. 25.
- 27. Gaviria, L., et al., Current trends in dental implants. J Korean Assoc Oral Maxillofac Surg, 2014. 40(2): p. 50-60.
- 28. Glazer, B., Restoration of endodontically treated teeth with carbon fibre posts--a prospective study. J Can Dent Assoc, 2000. 66(11): p. 613-8.
- 29. Iviglia, G., S. Kargozar, and F. Baino, Biomaterials, Current Strategies, and Novel Nano-Technological Approaches for Periodontal Regeneration. J Funct Biomater, 2019. 10(1).
- 30. Gautam, R., et al., Biocompatibility of polymethylmethacrylate resins used in dentistry. Journal of Biomedical Materials Research Part B-Applied Biomaterials, 2012. 100B(5): p. 1444-1450.
- 31. Park, S.E., M. Chao, and P.A. Raj, Mechanical properties of surface-charged poly(methyl methacrylate) as denture resins. Int J Dent, 2009. 2009: p. 841431.
- 32. Badami, V. and B. Ahuja, Biosmart materials: breaking new ground in dentistry. ScientificWorldJournal, 2014. 2014: p. 986912.
- 33. Polat, N.T., Polimetil Metakrilat (PMMA)'ların Cam Fiberler Güçlendirilmesi. Cumhuriyet Üniversitesi, 2002. 5(1): p. 41-45.
- 34. Arıkan, A., Silikon ve Polieter Lastik Esaslı Ölçü Materyalleri G.Ü. Dişhek. Fak. Der. , 1986. 3(1): p. 213-224.
Toplam 34 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Konular | Mühendislik |
| Bölüm | Diğer Bölümler |
| Yazarlar | |
| Yayımlanma Tarihi | 29 Aralık 2019 |
| Kabul Tarihi | 27 Aralık 2019 |
| Yayımlandığı Sayı | Yıl 2019 Cilt: 8 Sayı: 2 |
Kaynak Göster
Cited By
Metalik Biyomalzemelerin Yaşam Döngüsü Değerlendirmesi
Uşak Üniversitesi Fen ve Doğa Bilimleri Dergisi
https://doi.org/10.47137/usufedbid.1307658
Dental İmplant Çeşitleri ve Biyomateryaller
ADO Klinik Bilimler Dergisi
https://doi.org/10.54617/adoklinikbilimler.1206212
Dergimizin tarandığı indeksler