Landing Gear Models Toward Preliminary Various Simulations of Used Loads

Thi Sinh Vo; Tran Thi Bich Chau Vo

Araştırma Makalesi

Landing Gear Models Toward Preliminary Various Simulations of Used Loads

Yıl 2022, Cilt: 6 Sayı: 2, 38 - 42, 30.06.2022

Öz

The design of an appropriated landing gear is one of important requirements in aircraft system. In this paper, the landing gear model is shaped to two various models, and two approaches of used loads on the top surfaces of each model are preliminarily simulated by a 3D finite element analysis (ABAQUS) for analyzing these landing gears. Different simulations of tested conditions have been considered for both models, as well as the safety factor of each model is calculated for every tested condition. A conclusion is drawing about a better geometry to serve its future purposes.

Anahtar Kelimeler

Landing Gear, Finite Element Analysis, Simulation, Carbon Fiber Composite

Destekleyen Kurum

No

Proje Numarası

No

Kaynakça

[1] Vo, T.S., Vo, T.T.B.C., "Preparation and Characterization of Bis-Propargyl-Succinate, and its Application in Preliminary Healing Ability of Crosslinked Polyurethane using" Azide-Alkyne" Click", Journal of Engineering Science & Technology Review, 13(4):110-116, (2020).
[2] Vo, T.S., Vo, T.T.B.C., Tien, T.T., Sinh, N.T., "Enhancement of mechanical property of modified polyurethane with bis-butyl succinate", Journal of the Turkish Chemical Society Section A: Chemistry, 8(2):519-526, (2021).
[3] VO, T.S., VO, T.T.B.C., Pham, N.D., Lai, T.N.H., "A Self-Healing Material Based on Microcapsules of Poly (Urea-Formaldehyde)/Bis-Propargyl-Succinate Containing in Polyurethane Matrix", Journal of the Turkish Chemical Society Section A: Chemistry, 8(3):787-802, (2021).
[4] Vo, T.S., Vo, T.T.T.N., Vo, T.T.B.C., "Preparation and Characterization of Microcapsules Containing Canola Oil with Poly (urea-formaldehyde) Shell and its Stability", Journal of Engineering Science & Technology Review, 14(4):26-31, (2021).
[5] Vo, T.S., Vo, T.T.B.C., Nguyen, T.S., Tien, T.T., "Fabrication and Characterization of Gelatin/Chitosan Hydrogel Membranes", Journal of the Turkish Chemical Society Section A: Chemistry, 8(4):1045-1056, (2021).
[6] Vo, T.S., Vo, T.T.B.C., Nguyen, T.S., Pham, N.D., "Incorporation of hydroxyapatite in crosslinked gelatin/chitosan/poly(vinyl alcohol) hybrids utilizing as reinforced composite sponges, and their water absorption ability", Progress in Natural Science-Materials International, 31(5):664-671, (2021).
[7] Vo, T.S., Vo, T.T.B.C., Tran, T.T., Pham, N.D., "Enhancement of water absorption capacity and compressibility of hydrogel sponges prepared from gelatin/chitosan matrix with different polyols", Progress in Natural Science: Materials International, DOI https://doi.org/10.1016/j.pnsc.2021.10.001(2021).
[8] Vo, T.S., "Progresses and expansions of chitosan-graphene oxide hybrid networks utilizing as adsorbents and their organic dye removal performances: A short review", Journal of the Turkish Chemical Society Section A: Chemistry, 8(4):1121-1136, (2021).
[9] Bauer, P., "A simple landing gear simulation model for unmanned aerial vehicles", Periodica Polytechnica Transportation Engineering, 42(1):11-18, (2014).
[10] Jha, A., "Landing gear layout design for unmanned aerial vehicle", Dargapur, (2009).
[11] Kong, J., Lee, Y., Han, J., Ahn, O., "Drop impact analysis of smart unmanned aerial vehicle (SUAV) landing gear and comparison with experimental data", Materialwissenschaft und Werkstofftechnik: Entwicklung, Fertigung, Prüfung, Eigenschaften und Anwendungen technischer Werkstoffe, 40(3):192-197, (2009).
[12] Zaimis, I., Giannakis, E., Savaidis, G., Generative design case study of a CNC machined nose landing gear for an unmanned aerial vehicle, IOP Conference Series: Materials Science and Engineering, IOP Publishing, pp. 012064, (2021).
[13] Alhadi, S., Rianmora, S., Phlernjai, M., "Conceptual Design and Analysis of Small Power Station for Supporting Unmanned Aerial Vehicle (UAV) Deployment", Engineering Journal, 25(8):51-71, (2021).

Yıl 2022, Cilt: 6 Sayı: 2, 38 - 42, 30.06.2022

Thi Sinh Vo Tran Thi Bich Chau Vo

Öz

Proje Numarası

No

Kaynakça

[1] Vo, T.S., Vo, T.T.B.C., "Preparation and Characterization of Bis-Propargyl-Succinate, and its Application in Preliminary Healing Ability of Crosslinked Polyurethane using" Azide-Alkyne" Click", Journal of Engineering Science & Technology Review, 13(4):110-116, (2020).
[2] Vo, T.S., Vo, T.T.B.C., Tien, T.T., Sinh, N.T., "Enhancement of mechanical property of modified polyurethane with bis-butyl succinate", Journal of the Turkish Chemical Society Section A: Chemistry, 8(2):519-526, (2021).
[3] VO, T.S., VO, T.T.B.C., Pham, N.D., Lai, T.N.H., "A Self-Healing Material Based on Microcapsules of Poly (Urea-Formaldehyde)/Bis-Propargyl-Succinate Containing in Polyurethane Matrix", Journal of the Turkish Chemical Society Section A: Chemistry, 8(3):787-802, (2021).
[4] Vo, T.S., Vo, T.T.T.N., Vo, T.T.B.C., "Preparation and Characterization of Microcapsules Containing Canola Oil with Poly (urea-formaldehyde) Shell and its Stability", Journal of Engineering Science & Technology Review, 14(4):26-31, (2021).
[5] Vo, T.S., Vo, T.T.B.C., Nguyen, T.S., Tien, T.T., "Fabrication and Characterization of Gelatin/Chitosan Hydrogel Membranes", Journal of the Turkish Chemical Society Section A: Chemistry, 8(4):1045-1056, (2021).
[6] Vo, T.S., Vo, T.T.B.C., Nguyen, T.S., Pham, N.D., "Incorporation of hydroxyapatite in crosslinked gelatin/chitosan/poly(vinyl alcohol) hybrids utilizing as reinforced composite sponges, and their water absorption ability", Progress in Natural Science-Materials International, 31(5):664-671, (2021).
[7] Vo, T.S., Vo, T.T.B.C., Tran, T.T., Pham, N.D., "Enhancement of water absorption capacity and compressibility of hydrogel sponges prepared from gelatin/chitosan matrix with different polyols", Progress in Natural Science: Materials International, DOI https://doi.org/10.1016/j.pnsc.2021.10.001(2021).
[8] Vo, T.S., "Progresses and expansions of chitosan-graphene oxide hybrid networks utilizing as adsorbents and their organic dye removal performances: A short review", Journal of the Turkish Chemical Society Section A: Chemistry, 8(4):1121-1136, (2021).
[9] Bauer, P., "A simple landing gear simulation model for unmanned aerial vehicles", Periodica Polytechnica Transportation Engineering, 42(1):11-18, (2014).
[10] Jha, A., "Landing gear layout design for unmanned aerial vehicle", Dargapur, (2009).
[11] Kong, J., Lee, Y., Han, J., Ahn, O., "Drop impact analysis of smart unmanned aerial vehicle (SUAV) landing gear and comparison with experimental data", Materialwissenschaft und Werkstofftechnik: Entwicklung, Fertigung, Prüfung, Eigenschaften und Anwendungen technischer Werkstoffe, 40(3):192-197, (2009).
[12] Zaimis, I., Giannakis, E., Savaidis, G., Generative design case study of a CNC machined nose landing gear for an unmanned aerial vehicle, IOP Conference Series: Materials Science and Engineering, IOP Publishing, pp. 012064, (2021).
[13] Alhadi, S., Rianmora, S., Phlernjai, M., "Conceptual Design and Analysis of Small Power Station for Supporting Unmanned Aerial Vehicle (UAV) Deployment", Engineering Journal, 25(8):51-71, (2021).

Toplam 13 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	İngilizce
Konular	Mühendislik
Bölüm	Articles
Yazarlar	Thi Sinh Vo 0000-0003-3830-0474 Tran Thi Bich Chau Vo 0000-0002-3049-2080
Proje Numarası	No
Yayımlanma Tarihi	30 Haziran 2022
Yayımlandığı Sayı	Yıl 2022 Cilt: 6 Sayı: 2

Kaynak Göster

IEEE	T. S. Vo ve T. T. B. C. Vo, “Landing Gear Models Toward Preliminary Various Simulations of Used Loads”, IJESA, c. 6, sy. 2, ss. 38–42, 2022.