Research Article
BibTex RIS Cite

THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER

Year 2019, Volume: 2 Issue: 2, 78 - 85, 14.02.2020

Fatih Çolak Rıza Kara

Abstract

In this study, the production of high ceramic-to-metal ratio composite using tungsten carbide (WC) powders plated with Nickel (Ni) by electroless method was attempted by means of transient liquid phase sintering. Microstructural characterization in specimens before and after sintering process have been carried out using Scanning Electron Microscope (SEM) and DTA-TG and XRD techniques and microhardness measurements for various processing conditions. Results showed that WC powders can be successfully Ni plated by electroless plating method and optimal condition for the production of high ceramic-to-metal ratio composite is found to be 1150 ˚C in both air and Ar protected furnace conditions.

Keywords

Electroless Nickel Plating Composite Materials Sintering

Supporting Institution

Institute for Graduate Studies of Pure and Applied Science of Afyon Kocatepe University, Turkey

Project Number

031.TEF.30

References

  • Wang P T, Powder Technology 54(2) (1988) 107-118
  • Colak F, Production and Analysis of Ceramic-Metal Composite Material by Using Tungsten Carbide Powders Coated with Nickel by Chemical Technique, Master Thesis, University of Afyon Kocatepe, Turkey (2004)
  • Grosjean A, Rezrazi M, Takadoum J, Berçot P, Surface and Coatings Technology 137(1) (2001) 92
  • Małecki A, Micek-Ilnicka A, Surface and Coatings Technology 123(1) (2000) 72
  • Krishnaveni, K, Sankara Narayanan T S N, Seshadri, S K, Journal of Alloys and Compounds, 466(1-2) (2008) 412–420
  • Ling G P, and Li Y, Materials Letters 59(13) (2005) 1610–1613
  • Luo L, Wu Y, Li J,et al. Surface and Coatings Technology 206(6) (2011) 1091–1095
  • Luo L, Yu J, Luo J, et al. Ceramics International 36(6) (2010) 1989–1992
  • Michalski J, Wejrzanowski T, Gierlotka S, et al. Journal of the European Ceramic Society 27 (2007) 831–836
  • Xia C R, Guo X X, Li F Q, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects 179 (2001) 229–235
  • Wang H, Jia J, Song H, et al. Ceramics International 37(7) (2011) 2181–2184
  • Zhang Q, Wu M, and Zhao W, Surface and Coatings Technology 192 (2005) 213–219
  • Sharma A K, Suresh M R, Bhojraj H, et al. Metal Finishing, 96(3) (1998) 10
  • Velez M, Quinones H, Di Giampaolo A R, et al. International Journal of Refractory Metals and Hard Materials 17 (1999) 99
  • Simeonova Y, Danev K, Gidikova N, et al. Proceedings World Tribology Congress. 1997, London.
  • Svensson L E, in Control of Microstructures and Properties in Steel Arc Welds, Library of Congress Cataloging-in-Published Data, British, 1994

Year 2019, Volume: 2 Issue: 2, 78 - 85, 14.02.2020

Fatih Çolak Rıza Kara

Abstract

Project Number

031.TEF.30

References

  • Wang P T, Powder Technology 54(2) (1988) 107-118
  • Colak F, Production and Analysis of Ceramic-Metal Composite Material by Using Tungsten Carbide Powders Coated with Nickel by Chemical Technique, Master Thesis, University of Afyon Kocatepe, Turkey (2004)
  • Grosjean A, Rezrazi M, Takadoum J, Berçot P, Surface and Coatings Technology 137(1) (2001) 92
  • Małecki A, Micek-Ilnicka A, Surface and Coatings Technology 123(1) (2000) 72
  • Krishnaveni, K, Sankara Narayanan T S N, Seshadri, S K, Journal of Alloys and Compounds, 466(1-2) (2008) 412–420
  • Ling G P, and Li Y, Materials Letters 59(13) (2005) 1610–1613
  • Luo L, Wu Y, Li J,et al. Surface and Coatings Technology 206(6) (2011) 1091–1095
  • Luo L, Yu J, Luo J, et al. Ceramics International 36(6) (2010) 1989–1992
  • Michalski J, Wejrzanowski T, Gierlotka S, et al. Journal of the European Ceramic Society 27 (2007) 831–836
  • Xia C R, Guo X X, Li F Q, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects 179 (2001) 229–235
  • Wang H, Jia J, Song H, et al. Ceramics International 37(7) (2011) 2181–2184
  • Zhang Q, Wu M, and Zhao W, Surface and Coatings Technology 192 (2005) 213–219
  • Sharma A K, Suresh M R, Bhojraj H, et al. Metal Finishing, 96(3) (1998) 10
  • Velez M, Quinones H, Di Giampaolo A R, et al. International Journal of Refractory Metals and Hard Materials 17 (1999) 99
  • Simeonova Y, Danev K, Gidikova N, et al. Proceedings World Tribology Congress. 1997, London.
  • Svensson L E, in Control of Microstructures and Properties in Steel Arc Welds, Library of Congress Cataloging-in-Published Data, British, 1994
There are 16 citations in total.

Details

Primary Language English
Journal Section Articles
Authors

Fatih Çolak 0000-0002-1161-9875

Rıza Kara

Project Number 031.TEF.30
Publication Date February 14, 2020
Submission Date December 27, 2019
Acceptance Date January 6, 2020
Published in Issue Year 2019 Volume: 2 Issue: 2

Cite

APA Çolak, F., & Kara, R. (2020). THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER. Usak University Journal of Engineering Sciences, 2(2), 78-85.
AMA Çolak F, Kara R. THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER. UUJES. February 2020;2(2):78-85.
Chicago Çolak, Fatih, and Rıza Kara. “THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER”. Usak University Journal of Engineering Sciences 2, no. 2 (February 2020): 78-85.
EndNote Çolak F, Kara R (February 1, 2020) THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER. Usak University Journal of Engineering Sciences 2 2 78–85.
IEEE F. Çolak and R. Kara, “THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER”, UUJES, vol. 2, no. 2, pp. 78–85, 2020.
ISNAD Çolak, Fatih - Kara, Rıza. “THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER”. Usak University Journal of Engineering Sciences 2/2 (February 2020), 78-85.
JAMA Çolak F, Kara R. THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER. UUJES. 2020;2:78–85.
MLA Çolak, Fatih and Rıza Kara. “THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER”. Usak University Journal of Engineering Sciences, vol. 2, no. 2, 2020, pp. 78-85.
Vancouver Çolak F, Kara R. THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER. UUJES. 2020;2(2):78-85.

An international scientific e-journal published by the University of Usak