Research Article
BibTex RIS Cite

A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM

Year 2019, Volume: 23 Issue: 1, 85 - 93, 01.02.2019
https://doi.org/10.16984/saufenbilder.428457

Abstract

 The wire electrical discharge machining
(WEDM) is widely used in the cutting of Bulk Continuous Filament (BCF)
spinneret molds. Because of the low surface roughness of the spinneret molds
obtained by the WEDM method, it ensures that the polypropylene material has a
steady flow, volume and cross-sectional shape. Since the yarn extruded from the
sections on the BCF acquire a number of physical and visual properties surface
roughness of these molds have a great of importance. In this context, a new
model was developed to predict the surface quality of spinneret mold sections
machined using WEDM by Analysis of variance. Machining parameters such as
voltage, current, pulse time and wire feed rate were used as independent input
variables and surface roughness was used as dependent output parameters.  Contribution of input variables into the
output variable determined by means of analysis of variance (ANOVA). Developed
mathematical model estimations have been found to be in good agreement with the
measured ones. The parameters with the most effect on surface roughness are
listed as voltage, current, pulse, and feed, respectively.

References

  • REFERENCES [1] S. Kalpakjian, S. Schmid, ''Manufacturing, Engineering and Technology'', 5 ed., Prentice Hall, 2005.
  • [2] K.H. Ho, S.T. Newman, S. Rahimifard, R.D. Allen, ''State of the Art in Wire Electrical Discharge Machining (WEDM)'', International Journal of Machine Tools and Manufacture, vol. 44, pp. 1247-1259. DOI: 10.1016/j.ijmachtools, 2004.
  • [3] H. Abyar Firouzabadi, J. Parvizian, A. Abdullah, ''Improving Accuracy of Curved Corners in Wire EDM Successive Cutting'', Int. J. Adv Manuf. Technol, 76, 447-459. DOI: 10.1007/s00170-014-6270-0 , 2015.
  • [4] J.A. Sanchez, J.L. Rodil, A. Herrero, L.N.L. de Lacalle, A. Lamikiz, ''On the Influence of Cutting Speed Limitation on the Accuracy of Wire-EDM Corner-Cutting'', Journal of Materials Processing Technology, 182, 574-579. DOI: 10.1016/j.jmatprotec.2006.09.030, 2007.
  • [5] Z. Chen, Y. Huang, Z. Zhang, H. Li, W. Ming, G. Zhang, ''An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting'', Int. J. Adv. Manuf. Technol., 74, 917-929. DOI: 10.1007/s00170-014-6002-5, 2014.
  • [6] M. Durairaj, D. Sudharsun, N. Swamynathan, ''Analysis of Process Parameters in Wire EDM with Stainless Steel Using Single Objective Taguchi Method and Multi Objective Grey Relational Grade'', Procedia Engineering, 64, 868-877. DOI: 10.1016/j.proeng.2013.09.163, 2013.
  • [7] V. Aggarwal, S. Khangura, R.K. Garg, ''Parametric Modeling and Optimization for Wire Electrical Discharge Machining of Inconel 718 Using Response Surface Methodology'', Int. J. Adv. Manuf. Technol., 79, 31-47. DOI: 10.1007/s00170-015-6797-8, 2015.
  • [8] A. Ramamurthy, R. Sivaramakrishnan, T. Muthuramalingam, ''Taguchi-Grey Computation Methodology for Optimum Multiple Performance Measures on Machining Titanium Alloy in WEDM Process'', Indian Journal of Engineering and Materials Sciences (IJEMS), 22, pp. 181-186, 2015.
  • [9] A. Rutherford, ''Introducing Anova and Ancova A Glm Approach'', SAGE Publications, 2001.
  • [10] D. Yip-Hoi and D. Dutta, “A genetic algorithm application for sequencing operations in process planning for parallel machining,” IIE Transactions (Institute of Industrial Engineers), vol. 28, no. 1, pp. 55–68, 1996.
Year 2019, Volume: 23 Issue: 1, 85 - 93, 01.02.2019
https://doi.org/10.16984/saufenbilder.428457

Abstract

References

  • REFERENCES [1] S. Kalpakjian, S. Schmid, ''Manufacturing, Engineering and Technology'', 5 ed., Prentice Hall, 2005.
  • [2] K.H. Ho, S.T. Newman, S. Rahimifard, R.D. Allen, ''State of the Art in Wire Electrical Discharge Machining (WEDM)'', International Journal of Machine Tools and Manufacture, vol. 44, pp. 1247-1259. DOI: 10.1016/j.ijmachtools, 2004.
  • [3] H. Abyar Firouzabadi, J. Parvizian, A. Abdullah, ''Improving Accuracy of Curved Corners in Wire EDM Successive Cutting'', Int. J. Adv Manuf. Technol, 76, 447-459. DOI: 10.1007/s00170-014-6270-0 , 2015.
  • [4] J.A. Sanchez, J.L. Rodil, A. Herrero, L.N.L. de Lacalle, A. Lamikiz, ''On the Influence of Cutting Speed Limitation on the Accuracy of Wire-EDM Corner-Cutting'', Journal of Materials Processing Technology, 182, 574-579. DOI: 10.1016/j.jmatprotec.2006.09.030, 2007.
  • [5] Z. Chen, Y. Huang, Z. Zhang, H. Li, W. Ming, G. Zhang, ''An Analysis and Optimization of the Geometrical Inaccuracy in WEDM Rough Corner Cutting'', Int. J. Adv. Manuf. Technol., 74, 917-929. DOI: 10.1007/s00170-014-6002-5, 2014.
  • [6] M. Durairaj, D. Sudharsun, N. Swamynathan, ''Analysis of Process Parameters in Wire EDM with Stainless Steel Using Single Objective Taguchi Method and Multi Objective Grey Relational Grade'', Procedia Engineering, 64, 868-877. DOI: 10.1016/j.proeng.2013.09.163, 2013.
  • [7] V. Aggarwal, S. Khangura, R.K. Garg, ''Parametric Modeling and Optimization for Wire Electrical Discharge Machining of Inconel 718 Using Response Surface Methodology'', Int. J. Adv. Manuf. Technol., 79, 31-47. DOI: 10.1007/s00170-015-6797-8, 2015.
  • [8] A. Ramamurthy, R. Sivaramakrishnan, T. Muthuramalingam, ''Taguchi-Grey Computation Methodology for Optimum Multiple Performance Measures on Machining Titanium Alloy in WEDM Process'', Indian Journal of Engineering and Materials Sciences (IJEMS), 22, pp. 181-186, 2015.
  • [9] A. Rutherford, ''Introducing Anova and Ancova A Glm Approach'', SAGE Publications, 2001.
  • [10] D. Yip-Hoi and D. Dutta, “A genetic algorithm application for sequencing operations in process planning for parallel machining,” IIE Transactions (Institute of Industrial Engineers), vol. 28, no. 1, pp. 55–68, 1996.
There are 10 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Research Articles
Authors

Erdoğan Kanca This is me

Volkan Cem Taşkın This is me

Ali Günen

Publication Date February 1, 2019
Submission Date May 30, 2018
Acceptance Date October 5, 2018
Published in Issue Year 2019 Volume: 23 Issue: 1

Cite

APA Kanca, E., Taşkın, V. C., & Günen, A. (2019). A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM. Sakarya University Journal of Science, 23(1), 85-93. https://doi.org/10.16984/saufenbilder.428457
AMA Kanca E, Taşkın VC, Günen A. A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM. SAUJS. February 2019;23(1):85-93. doi:10.16984/saufenbilder.428457
Chicago Kanca, Erdoğan, Volkan Cem Taşkın, and Ali Günen. “A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM”. Sakarya University Journal of Science 23, no. 1 (February 2019): 85-93. https://doi.org/10.16984/saufenbilder.428457.
EndNote Kanca E, Taşkın VC, Günen A (February 1, 2019) A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM. Sakarya University Journal of Science 23 1 85–93.
IEEE E. Kanca, V. C. Taşkın, and A. Günen, “A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM”, SAUJS, vol. 23, no. 1, pp. 85–93, 2019, doi: 10.16984/saufenbilder.428457.
ISNAD Kanca, Erdoğan et al. “A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM”. Sakarya University Journal of Science 23/1 (February 2019), 85-93. https://doi.org/10.16984/saufenbilder.428457.
JAMA Kanca E, Taşkın VC, Günen A. A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM. SAUJS. 2019;23:85–93.
MLA Kanca, Erdoğan et al. “A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM”. Sakarya University Journal of Science, vol. 23, no. 1, 2019, pp. 85-93, doi:10.16984/saufenbilder.428457.
Vancouver Kanca E, Taşkın VC, Günen A. A Modeling Study on Surface Roughness of Spinneret Mold Sections Machined By WEDM. SAUJS. 2019;23(1):85-93.